AI Video Editing Flows

Effect #097 in our rendered series

Speed Ramp and Freeze Frame Effect

A creator ramps an action shot from full speed into slow motion and freezes on the hit before a hard cut.

Real footage

1920x1080 file, 5.3 MB

Rendered by us at 1920x1080 over a shot from Tears of Steel (Blender Foundation, CC-BY 3.0). Expand plays the full 1080p file.

Edit in Premiere, Resolve or After Effects? Jump to editor templates. Making many versions of the same video? Use the code route.

Make this effect with

Built and tested by us

Other ways, not tested by us

Use it in a real edit

Second shot

1920x1080 file, 2.8 MB

The same readout and flash on a dialogue close-up: the shot freezes on Celia. Nothing in the composition changed except the footage file.

The composition plays your clip as a muted <video> layer under the graphics (the file plate.mp4 in the code below), so you swap the footage by replacing that file and rendering again. To use the graphics in an editor instead, switch the background off and render a transparent MOV (an H.264 MP4 cannot carry transparency):

Render the graphics alone, with transparency
npx hyperframes render . -o overlay.mov --format mov --fps 24 --variables '{"plate":false}'

The routes in full

With Claude Code: the prompt we used

Rendered and tested by us in HyperFrames 0.8.10 on Nov 14, 2026.

Make a 5 second speed ramp and freeze on real action footage. The clip plays at full speed, ramps down to slow motion with cinematic bars and a vignette closing in, a readout chip going from Speed 100% to Speed 25%, then freezes on the key frame with a white flash and a slow push-in while the chip reads Freeze. After a beat, hard cut to the next shot with a second small flash. Make the accent colour, the flash strength and a switch for the speed readout variables, and keep a switch that hides the footage.

What changed since this prompt: the demo on this page is our second version, 5 seconds long, rebuilt on a shot from Tears of Steel with the same animation idea. The full composition below is the one we rendered; its build log lists every change.

Built by Claude Code (Opus) from the HyperFrames registry block beat-freeze-cut, then edited by us for real footage. Claude Code then checked the composition with hyperframes lint and hyperframes check before we rendered it.

What we had to correct (3 notes from the build log):

  • beat-freeze-cut dresses a freeze on a cut. We baked the actual ramp into the plate with ffmpeg (plate nw_soldier_ramp: 100% 0 to 0.5 s, slow motion to 1.4 s with motion-interpolated frames, freeze 1.4 to 2.6 s, then the church tower shot) because HyperFrames cannot retime a video clip, and drove the readout, bars, vignette, flash and push-in from GSAP at those measured times.
  • The freeze frame is the soldier's hand on the rifle just after the shot; the flash is the overlay. The film shows no clear muzzle flash on that frame.
  • v2 (14 Nov 2026): Freeze readout now holds until 2.55 s so it is fully legible through the freeze (was mid-fade at the 2.5 s QA frame).

With HyperFrames code

Rendered and tested by us in HyperFrames 0.8.10 on Nov 14, 2026.

Install the block and render
npx hyperframes add beat-freeze-cut
npx hyperframes render . -o out.mp4 --fps 24

Settings you can change without rebuilding (pass them with --variables):

SettingNameTypeDefault
Accent colouraccentcolor#ffd23f
Show speed readoutreadoutbooleantrue
Freeze flash strengthflashnumber0.9
Show backgroundplatebooleantrue
Our full composition (index.html, 4 KB)
index.html
<!doctype html>
<html lang="en" data-composition-variables='[{"id": "accent", "type": "color", "label": "Accent colour", "default": "#ffd23f"}, {"id": "readout", "type": "boolean", "label": "Show speed readout", "default": true}, {"id": "flash", "type": "number", "label": "Freeze flash strength", "default": 0.9, "min": 0, "max": 1}, {"id": "plate", "type": "boolean", "label": "Show background", "default": true}]'>
  <head>
    <meta charset="UTF-8" />
    <meta name="viewport" content="width=1920, height=1080" />
    <link href="https://fonts.googleapis.com/css2?family=Montserrat:wght@600;800&display=block" rel="stylesheet" />
    <script src="gsap.min.js"></script>
    <style>
      *, *::before, *::after { box-sizing: border-box; margin: 0; padding: 0; }
      html, body { width: 1920px; height: 1080px; overflow: hidden; background: transparent; }
      #root { position: relative; width: 100%; height: 100%; overflow: hidden; background: transparent; }
      .vid { position: absolute; left: 0; top: 0; width: 1920px; height: 1080px; object-fit: cover; }
      .mont { font-family: "Montserrat", sans-serif; font-weight: 800; }

      #pw { position: absolute; inset: 0; transform-origin: 50% 55%; }
      #bt, #bb { position: absolute; left: 0; width: 1920px; height: 90px; background: #000; }
      #bt { top: 0; transform: translateY(-90px); } #bb { bottom: 0; transform: translateY(90px); }
      #vig { position: absolute; inset: 0; box-shadow: inset 0 0 260px 40px rgba(0,0,0,0.75); opacity: 0; }
      #fl { position: absolute; inset: 0; background: #fff; opacity: 0; }
      .rd { position: absolute; left: 96px; bottom: 110px; font-size: 56px; opacity: 0; background: rgba(10,12,18,0.84); color: #fff; border-radius: 14px; padding: 14px 30px; box-shadow: 0 10px 30px rgba(0,0,0,0.45); border-left: 8px solid var(--accent); }
    
    </style>
  </head>
  <body>
    <div id="root" data-composition-id="main" data-start="0" data-duration="5" data-fps="24" data-width="1920" data-height="1080">
      <div id="pw"><video id="v1" class="plate vid " src="plate.mp4" muted playsinline data-start="0" data-duration="5.0"></video></div>
      <div id="vig"></div><div id="bt"></div><div id="bb"></div>
      <div class="rd mont" id="r1">Speed 100%</div><div class="rd mont" id="r2">Speed 25%</div><div class="rd mont" id="r3">Freeze</div>
      <div id="fl"></div>
    </div>
    <script>
      window.__timelines = window.__timelines || {};
      (function () {
        const v = window.__hyperframes.getVariables();
        const tl = gsap.timeline({ paused: true });
        if (!v.plate) document.querySelectorAll(".plate").forEach((e) => (e.style.display = "none"));
        const $ = (s) => document.querySelector(s);

        document.getElementById("root").style.setProperty("--accent", v.accent);
        if (!v.readout) document.querySelectorAll(".rd").forEach((e) => (e.style.display = "none"));
        const F = v.flash;
        tl.fromTo("#r1", { opacity: 0, x: -24 }, { opacity: 1, x: 0, duration: 0.25, ease: "power2.out" }, 0.1);
        tl.to("#r1", { opacity: 0, duration: 0.12 }, 0.5);
        tl.fromTo("#r2", { opacity: 0, scale: 0.9 }, { opacity: 1, scale: 1, duration: 0.2, ease: "power2.out" }, 0.55);
        tl.to("#r2", { opacity: 0, duration: 0.1 }, 1.4);
        tl.fromTo("#r3", { opacity: 0, scale: 1.3 }, { opacity: 1, scale: 1, duration: 0.18, ease: "power3.out" }, 1.42);
        tl.to("#r3", { opacity: 0, duration: 0.1 }, 2.55);
        tl.to("#bt", { y: 0, duration: 0.4, ease: "power2.out" }, 0.45);
        tl.to("#bb", { y: 0, duration: 0.4, ease: "power2.out" }, 0.45);
        tl.to("#bt", { y: -90, duration: 0.2 }, 2.62);
        tl.to("#bb", { y: 90, duration: 0.2 }, 2.62);
        tl.to("#vig", { opacity: 1, duration: 0.9, ease: "power1.in" }, 0.5);
        tl.to("#vig", { opacity: 0, duration: 0.15 }, 2.62);
        tl.fromTo("#pw", { scale: 1 }, { scale: 1.06, duration: 2.1, ease: "power1.inOut" }, 0.5);
        tl.set("#pw", { scale: 1 }, 2.62);
        tl.fromTo("#fl", { opacity: 0 }, { opacity: F, duration: 0.05, ease: "none" }, 1.42);
        tl.to("#fl", { opacity: 0, duration: 0.35, ease: "power2.out" }, 1.47);
        tl.to("#fl", { opacity: F * 0.7, duration: 0.04, ease: "none" }, 2.6);
        tl.to("#fl", { opacity: 0, duration: 0.22, ease: "power2.out" }, 2.64);
    
        tl.to({}, { duration: 5 }, 0);
        window.__timelines["main"] = tl;
      })();
    </script>
  </body>
</html>

With Remotion

We have not built this effect in Remotion. If you use it, read its licence first: Individuals (personal or commercial use), organisations or teams with a total headcount of 3 or less, non-profits, and anyone evaluating Remotion before commercial use. A company does not qualify merely because it is unprofitable. Everyone not eligible for the Free License needs a Company License. Remotion licence FAQ, checked Nov 4, 2026.

In your editor: Premiere, Resolve, After Effects, CapCut

We have not reviewed an editor template for this effect yet.

Variations

The same composition rendered again with different settings. Nothing was rebuilt.

Soft flash, white readout accent{"flash":0.4,"accent":"#e8eef5"}
Hot orange accent, full flash{"flash":1,"accent":"#ff5a1f"}
No speed readout{"readout":false}

Spec and test details

Engine
HyperFrames 0.8.10, GSAP 3.14.2 (local copy)
Length and frame rate
5 seconds at 24 fps, rendered at 1920x1080
Video files on this page
H.264: 1920x1080 for Expand (5410 KB), 1280x720 in the page (1907.6 KB), 640x360 in galleries (395.6 KB), no audio
Picture check
The 1080p file scores VMAF 98.98 against our render master and keeps 99% of its edge detail (measured by us with FFmpeg libvmaf and OpenCV)
Footage
soldier on a balcony: 100% speed, ramp to slow motion, freeze 1.4 to 2.6 s, hard cut to the church tower (baked with ffmpeg from 432.0 to 432.78 s and 438.75 s) (Tears of Steel, 7:12)
Tested in editors
None yet
Flash check
Passed: at most 2 general and 0 red flashes in any second. automated approximation of WCAG 2.3.1 on a 96x54 grid, whole loop including the restart; not a certification.
Licence
Composition adapted by us from the HyperFrames registry (Apache-2.0); text fonts from Google Fonts under the SIL Open Font License.
Last tested
Nov 14, 2026
Machine
Laptop: AMD Ryzen 7 7735U (8 cores, 16 threads), 31 GB RAM, Windows 11 Home; CPU rendering
Technical details: render times and file sizes
  • Render of the 5-second master: 57.8 s (2 render workers, on the laptop above).
  • full.mp4: 5410 KB
  • hero.mp4: 1907.6 KB
  • hero.webp: 29.7 KB
  • tile.mp4: 395.6 KB
  • tile.webp: 10.3 KB
  • real-edit.mp4: 940.2 KB
  • real-edit-full.mp4: 2871.1 KB
  • real-edit.webp: 27.9 KB
  • Variation "subtle": rendered in 59.4 s, 402.9 KB
  • Variation "bold": rendered in 49 s, 401.1 KB
  • Variation "clean": rendered in 41.9 s, 401.4 KB

Credits

  • Built from the HyperFrames registry block beat-freeze-cut by HeyGen (Apache-2.0), adapted by us.
  • Fonts from Google Fonts, under the SIL Open Font License.
  • Footage: Tears of Steel, (c) Blender Foundation, mango.blender.org, licensed CC-BY 3.0. We cropped the shots to 16:9 and laid our graphics over them.
  • Editor templates and other routes on this page belong to their creators, who are credited on each card.

Related effects and jobs

Page checked on Nov 4, 2026.