AI Video Editing Flows

Effect #090 in our rendered series

Halftone dissolve transition

Ink dots pop on in a staggered grid and open into windows onto scene B, then a second pass returns to A.

Real footage

1920x1080 file, 5.0 MB

Rendered by us at 1920x1080 over shots from Tears of Steel (Blender Foundation, CC-BY 3.0). Expand plays the full 1080p file.

Edit in Premiere, Resolve or After Effects? Jump to editor templates. Making many versions of the same video? Use the code route.

Make this effect with

Built and tested by us

Other ways, not tested by us

Use it in a real edit

Second shot

1920x1080 file, 4.9 MB

The same halftone dissolve from Thom's face to the misty skyline. Nothing in the composition changed except the footage file.

The composition plays your clip as a muted <video> layer under the graphics (the file plate.mp4 in the code below), so you swap the footage by replacing that file and rendering again. To use the graphics in an editor instead, switch the background off and render a transparent MOV (an H.264 MP4 cannot carry transparency):

Render the graphics alone, with transparency
npx hyperframes render . -o overlay.mov --format mov --fps 24 --variables '{"plate":false}'

The routes in full

With Claude Code: the prompt we used

Rendered and tested by us in HyperFrames 0.8.10 on Nov 7, 2026.

Write a HyperFrames clip where scene A dissolves into scene B through a growing halftone dot pattern, then back again. Make the dot size, the dot colour and the speed variables.

What changed since this prompt: the demo on this page is our second version, 5 seconds long, rebuilt on 2 shots from Tears of Steel with the same animation idea. The full composition below is the one we rendered; its build log lists every change.

Built by a Claude Code subagent (Sonnet) from the HyperFrames registry block halftone-dissolve, HyperFrames 0.8.10. Claude Code then checked the composition with hyperframes lint and hyperframes check before we rendered it.

What we had to correct (6 notes from the build log):

  • lint 0 errors, 0 warnings.
  • hyperframes check: failed with content_overlap and text_occluded flags for the scene text across 0.28 to 4.88 s. By design: two stacked full-frame scenes and an ink layer of dots between them. Not changed.
  • Flash check (WCAG 2.3.1 approximation, whole loop): pass, 1 general and 0 red flashes per second; the three variations and the real-edit composite pass too.
  • Four 1920 px frames saved in renders/review_083plus/halftone-dissolve-transition/ and looked at by eye. Flash check: 1 general flash per second at most (limit 3), 0 red. Frames show the dots opening onto B from the right, then B to A. The hero is 356 KB and the tile 248 KB (the dots do not compress as well as flat colour; within the 500 KB and 350 KB caps). No fault found.
  • Status: QA_HOLD in tools/build_pack.py. Not published until the review pass releases it.
  • v2 (7 Nov 2026): real footage from Tears of Steel, plates tr_oldman, tr_engines. One pass 0.8 s at 2.0 s.

With HyperFrames code

Rendered and tested by us in HyperFrames 0.8.10 on Nov 7, 2026.

Install the block and render
npx hyperframes add halftone-dissolve
npx hyperframes render . -o out.mp4 --fps 24

Settings you can change without rebuilding (pass them with --variables):

SettingNameTypeDefault
Dot sizedot_sizeenummedium
Dot colourdot_colorcolor#ffd166
Speedspeednumber1
Show backgroundplatebooleantrue
Our full composition (index.html, 5 KB)
index.html
<!doctype html>
<html lang="en" data-composition-variables='[{"id":"dot_size","type":"enum","label":"Dot size","default":"medium","options":[{"value":"small","label":"Small"},{"value":"medium","label":"Medium"},{"value":"large","label":"Large"}]},{"id":"dot_color","type":"color","label":"Dot colour","default":"#ffd166"},{"id":"speed","type":"number","label":"Speed","default":1,"min":0.8,"max":2},{"id":"plate","type":"boolean","label":"Show background","default":true}]'>
  <head>
    <meta charset="UTF-8" />
    <meta name="viewport" content="width=1920, height=1080" />
    <link href="https://fonts.googleapis.com/css2?family=Montserrat:wght@800&display=block" rel="stylesheet" />
    <script src="gsap.min.js"></script>
    <style>
      *, *::before, *::after { box-sizing: border-box; margin: 0; padding: 0; }
      html, body { width: 1920px; height: 1080px; overflow: hidden; background: transparent; }
      #root { position: relative; width: 100%; height: 100%; overflow: hidden; background: transparent; }

      .scene { position: absolute; left: 0; top: 0; width: 1920px; height: 1080px; overflow: hidden; font-family: "Montserrat", sans-serif; font-weight: 800; }
.vid { position: absolute; left:0; top:0; width:1920px; height:1080px; object-fit: cover; }
            #stage { position: absolute; inset: 0; }

    </style>
  </head>
  <body>
    <div id="root" data-composition-id="main" data-start="0" data-duration="5" data-fps="24" data-width="1920" data-height="1080">
      <div id="stage"><div class="scene" id="A" style="z-index:1"><video class="plate vid" src="plate_a.mp4" muted playsinline data-start="0" data-duration="3.0"></video></div><canvas id="ink1" width="1920" height="1080" style="position:absolute;left:0;top:0;width:1920px;height:1080px;z-index:2"></canvas><div class="scene" id="B" style="z-index:3"><video class="plate vid" src="plate_b.mp4" muted playsinline data-start="2.0" data-duration="3.0"></video></div></div>
    </div>
    <script>
      window.__timelines = window.__timelines || {};
      (function () {
        const v = window.__hyperframes.getVariables();
        const tl = gsap.timeline({ paused: true });

        const num = (x, d, lo, hi) => { x = Number(x); if (!isFinite(x)) x = d; return Math.max(lo, Math.min(hi, x)); };
        function mulberry32(a) { return function () { a |= 0; a = (a + 0x6D2B79F5) | 0; let t = Math.imul(a ^ (a >>> 15), 1 | a); t = (t + Math.imul(t ^ (t >>> 7), 61 | t)) ^ t; return ((t ^ (t >>> 14)) >>> 0) / 4294967296; }; }
        const speed = num(v.speed, 1, 0.8, 2);
        const pitch = ({ small: 1 / 44, medium: 1 / 30, large: 1 / 20 })[v.dot_size] || 1 / 30;
        const ink = String(v.dot_color || "#ffd166");
        const W = 1920, H = 1080;
        const A = document.getElementById("A"), B = document.getElementById("B"), c1 = document.getElementById("ink1");
        if (!v.plate) document.querySelectorAll(".plate").forEach((e) => (e.style.display = "none"));
        const cell = W * pitch, cols = Math.ceil(W / cell) + 2, rows = Math.ceil(H / cell) + 1, R_MAX = cell * 0.78;
        function makeDots(seed, rev) {
          const rnd = mulberry32(seed), list = [];
          for (let r = 0; r < rows; r++) for (let c = 0; c < cols; c++) {
            const x = (c + ((r & 1) === 0 ? 0.25 : 0.75)) * cell, y = (r + 0.5) * cell;
            let base = x / W; if (rev) base = 1 - base;
            const th = Math.max(0, Math.min(1, base + (rnd() - 0.5) * 0.22));
            list.push({ x: x, y: y, th: th * 0.62 });
          }
          return list;
        }
        const dots1 = makeDots(0x4a17f03d, false);
        const cl = function (t) { return t < 0 ? 0 : t > 1 ? 1 : t; };
        const sm = function (t) { return t * t * (3 - 2 * t); };
        function arcPath(dots, p) {
          const parts = [];
          for (let i = 0; i < dots.length; i++) {
            const rw = R_MAX * sm(cl((p - dots[i].th) / 0.38));
            if (rw > 0.25) {
              const x = dots[i].x, y = dots[i].y;
              parts.push("M " + (x + rw).toFixed(1) + " " + y.toFixed(1) + " A " + rw.toFixed(1) + " " + rw.toFixed(1) + " 0 1 0 " + (x - rw).toFixed(1) + " " + y.toFixed(1) + " A " + rw.toFixed(1) + " " + rw.toFixed(1) + " 0 1 0 " + (x + rw).toFixed(1) + " " + y.toFixed(1) + " Z");
            }
          }
          return parts.length ? 'path("' + parts.join(" ") + '")' : 'path("M 0 0 Z")';
        }
        function drawInk(canvas, dots, p) {
          const ctx = canvas.getContext("2d");
          ctx.clearRect(0, 0, W, H);
          if (p <= 0 || p >= 1) return;
          ctx.fillStyle = ink;
          for (let i = 0; i < dots.length; i++) {
            const ri = R_MAX * sm(cl((p + 0.07 - dots[i].th) / 0.38));
            if (ri > 0.25) { ctx.beginPath(); ctx.arc(dots[i].x, dots[i].y, ri, 0, Math.PI * 2); ctx.fill(); }
          }
        }
        const P1 = { p: 0 };
        function paint() {
          B.style.clipPath = P1.p >= 1 ? "none" : arcPath(dots1, P1.p);
          drawInk(c1, dots1, P1.p);
        }
        const D = 0.8 / speed;
        tl.fromTo(P1, { p: 0 }, { p: 1, duration: D, ease: "power1.inOut" }, 2.0);
        tl.to({}, { duration: 5 }, 0);
        tl.eventCallback("onUpdate", paint);
        paint();
        window.__timelines["main"] = tl;

      })();
    </script>
  </body>
</html>

With Remotion

We have not built this effect in Remotion. If you use it, read its licence first: Individuals (personal or commercial use), organisations or teams with a total headcount of 3 or less, non-profits, and anyone evaluating Remotion before commercial use. A company does not qualify merely because it is unprofitable. Everyone not eligible for the Free License needs a Company License. Remotion licence FAQ, checked Nov 4, 2026.

In your editor: Premiere, Resolve, After Effects, CapCut

We have not reviewed an editor template for this effect yet.

Variations

The same composition rendered again with different settings. Nothing was rebuilt.

Subtle: small blue dots, slower{"dot_size":"small","dot_color":"#8fb3ff","speed":0.85}
Bold: large hot pink dots, fast{"dot_size":"large","dot_color":"#ff2d6f","speed":1.6}
Medium teal dots at the slowest speed{"dot_size":"medium","dot_color":"#12b886","speed":0.8}

Spec and test details

Engine
HyperFrames 0.8.10, GSAP 3.14.2 (local copy)
Length and frame rate
5 seconds at 24 fps, rendered at 1920x1080
Video files on this page
H.264: 1920x1080 for Expand (5130.8 KB), 1280x720 in the page (2128.9 KB), 640x360 in galleries (392.1 KB), no audio
Picture check
The 1080p file scores VMAF 97.71 against our render master and keeps 92% of its edge detail (measured by us with FFmpeg libvmaf and OpenCV)
Footage
Old Thom close-up, warm, looking down (Tears of Steel, 9:13); huge glowing rocket engines firing, warm and pink (Tears of Steel, 0:09)
Tested in editors
None yet
Flash check
Passed: at most 1 general and 0 red flashes in any second. automated approximation of WCAG 2.3.1 on a 96x54 grid, whole loop including the restart; not a certification.
Licence
Composition adapted by us from the HyperFrames registry (Apache-2.0); text fonts from Google Fonts under the SIL Open Font License.
Last tested
Nov 7, 2026
Machine
Laptop: AMD Ryzen 7 7735U (8 cores, 16 threads), 31 GB RAM, Windows 11 Home; CPU rendering
Technical details: render times and file sizes
  • Render of the 5-second master: 85.8 s (2 render workers, on the laptop above).
  • full.mp4: 5130.8 KB
  • hero.mp4: 2128.9 KB
  • hero.webp: 97.8 KB
  • tile.mp4: 392.1 KB
  • tile.webp: 34.1 KB
  • real-edit.mp4: 1366.1 KB
  • real-edit-full.mp4: 5060.8 KB
  • real-edit.webp: 80.2 KB
  • Variation "subtle": rendered in 66.4 s, 411.6 KB
  • Variation "bold": rendered in 69.1 s, 436.5 KB
  • Variation "teal": rendered in 67.5 s, 393.9 KB

Credits

  • Built from the HyperFrames registry component halftone-dissolve by HeyGen (Apache-2.0), adapted by us.
  • Fonts from Google Fonts, under the SIL Open Font License.
  • Footage: Tears of Steel, (c) Blender Foundation, mango.blender.org, licensed CC-BY 3.0. We cropped the shots to 16:9 and laid our graphics over them.
  • Editor templates and other routes on this page belong to their creators, who are credited on each card.

Related effects and jobs

Page checked on Nov 4, 2026.