AI Video Editing Flows

Effect #011 in our rendered series

Light leaks

Warm or cool leaks of light that drift over a shot for memory beats and soft transitions.

Real footage

1920x1080 file, 4.9 MB

Rendered by us at 1920x1080 over a shot from Tears of Steel (Blender Foundation, CC-BY 3.0). Expand plays the full 1080p file.

Edit in Premiere, Resolve or After Effects? Jump to editor templates. Making many versions of the same video? Use the code route.

Make this effect with

Built and tested by us

Other ways, not tested by us

Use it in a real edit

Second shot

1920x1080 file, 5.1 MB

The same light leaks over the walk along the canal bridge. Nothing in the composition changed except the footage file.

The composition plays your clip as a muted <video> layer under the graphics (the file plate.mp4 in the code below), so you swap the footage by replacing that file and rendering again. To use the graphics in an editor instead, switch the background off and render a transparent MOV (an H.264 MP4 cannot carry transparency):

Render the graphics alone, with transparency
npx hyperframes render . -o overlay.mov --format mov --fps 24 --variables '{"plate":false}'

The routes in full

With Claude Code: the prompt we used

Rendered and tested by us in HyperFrames 0.8.10 on Nov 7, 2026.

Build a 5-second, 1920x1080, 24 fps HyperFrames composition of organic light leaks from the registry block organic-light-leak-overlay. Over the moving background and a simple title card ("LIGHT LEAKS"), warm leaks drift in from the edges, bloom softly across the frame and fade, in two waves (about 0.4 to 2.4 s and 2.6 to 4.6 s), using a screen blend so the subject stays visible. No hard flashes. Variables: intensity (subtle, strong), tint (warm, cool), title on or off, background switch so it can render as a transparent overlay.

What changed since this prompt: the demo on this page is our second version, 5 seconds long, rebuilt on a shot from Tears of Steel with the same animation idea. The full composition below is the one we rendered; its build log lists every change.

Built by a Claude Code subagent (Sonnet) from the HyperFrames registry block organic-light-leak-overlay, HyperFrames 0.8.10. Claude Code then checked the composition with hyperframes lint and hyperframes check before we rendered it.

What we had to correct (9 notes from the build log):

  • 4 Nov 2026, lint 1: 0 errors, 0 warnings. No fixes needed.
  • Not run (by rule): check, render, snapshot, preview.
  • Source: registry block organic-light-leak-overlay. Kept its three layers (amber, red, gold streak), the gradients, blur and the screen blend on the leak container.
  • Changed: two waves (0.4 to 2.4 s and 2.6 to 4.6 s) of three layers each, different drift directions per wave; each layer rises and falls on sine ease over its wave so nothing flashes; intensity multiplies layer peak (0.5 subtle, 0.95 strong); the cool tint swaps the colour stops in script.
  • The title card sits under the leaks (lower z-index) so the screen blend lights it rather than covering it.
  • Transparent overlay: alpha_vars turns off the background and the title. Screen blend over a transparent frame is only meaningful when the lead composites it with a screen blend onto footage; worth a check on the first transparent render.
  • Decided against: any white flash layer; the component's separate fixed 4 s envelope.
  • 5 Nov 00:30 IST (lead): the default light leak was too faint to show the effect; default intensity changed from subtle to strong (subtle stays as a variation). Lint 0 errors.
  • v2 (7 Nov 2026): real footage from Tears of Steel, plates zt_arm. Leaks start at 1.0 s. The title card was moved to the right after the first render covered the chin.

With HyperFrames code

Rendered and tested by us in HyperFrames 0.8.10 on Nov 7, 2026.

Install the block and render
npx hyperframes add organic-light-leak-overlay
npx hyperframes render . -o out.mp4 --fps 24

Settings you can change without rebuilding (pass them with --variables):

SettingNameTypeDefault
Intensityintensityenumstrong
Tinttintenumwarm
Show title cardtitlebooleantrue
Show backgroundplatebooleantrue
Our full composition (index.html, 6 KB)
index.html
<!doctype html>
<html lang="en" data-composition-variables='[
  {"id":"intensity","type":"enum","label":"Intensity","default":"strong","options":[{"value":"subtle","label":"Subtle"},{"value":"strong","label":"Strong"}]},
  {"id":"tint","type":"enum","label":"Tint","default":"warm","options":[{"value":"warm","label":"Warm"},{"value":"cool","label":"Cool"}]},
  {"id":"title","type":"boolean","label":"Show title card","default":true},
  {"id":"plate","type":"boolean","label":"Show background","default":true}
]'>
  <head>
    <meta charset="UTF-8" />
    <meta name="viewport" content="width=1920, height=1080" />
    <link href="https://fonts.googleapis.com/css2?family=Montserrat:wght@800&display=block" rel="stylesheet" />
    <script src="gsap.min.js"></script>
    <style>
      *, *::before, *::after { box-sizing: border-box; margin: 0; padding: 0; }
      html, body { width: 1920px; height: 1080px; overflow: hidden; background: transparent; }
      #root { position: relative; width: 100%; height: 100%; overflow: hidden; background: transparent; }
.vid { position: absolute; left:0; top:0; width:1920px; height:1080px; object-fit: cover; }
      #tag { position: absolute; left: 96px; top: 80px; z-index: 30; font-family: "Montserrat", sans-serif; font-weight: 800; font-size: 40px; letter-spacing: 0.04em; color: #fff; background: rgba(10,12,18,0.85); padding: 12px 28px; border-radius: 10px; }
      #tag span { display: none; }
      #title { position: absolute; right: 96px; bottom: 80px; z-index: 5; background: rgba(10,12,18,0.82); padding: 14px 40px 18px; border-radius: 14px; opacity: 0; }
      #title span { font-family: "Montserrat", sans-serif; font-weight: 800; font-size: 96px; letter-spacing: 0.02em; color: #fff; }
      #leaks { position: absolute; inset: 0; z-index: 10; overflow: hidden; mix-blend-mode: screen; pointer-events: none; }
      .lk { position: absolute; inset: -20%; opacity: 0; will-change: opacity, transform; }
    </style>
  </head>
  <body>
    <div id="root" data-composition-id="main" data-start="0" data-duration="5" data-fps="24" data-width="1920" data-height="1080">
      <video class="plate vid" src="plate.mp4" muted playsinline data-start="0" data-duration="5"></video>
      <div id="tag"><span id="tagO">Original</span><span id="tagL">With light leaks</span></div>
      <div id="title"><span>Amsterdam</span></div>
      <div id="leaks" aria-hidden="true"></div>
    </div>
    <script>
      window.__timelines = window.__timelines || {};
      (function () {
        const v = window.__hyperframes.getVariables();
        if (!v.plate) document.querySelectorAll(".plate").forEach((e) => (e.style.display = "none"));
        if (v.title === false || v.title === "false") document.getElementById("title").style.display = "none";
        const K = v.intensity === "strong" ? 0.95 : 0.5;
        const P = v.tint === "cool"
          ? { a: ["200 236 255", "70 150 255"], r: ["120 100 255", "70 70 230"], g: ["70 200 240", "210 250 255"] }
          : { a: ["255 241 197", "255 126 57"], r: ["255 79 61", "255 44 92"], g: ["255 144 62", "255 247 205"] };
        const GRAD = {
          a: (c) => `radial-gradient(ellipse 52% 110% at 10% 58%, rgb(${c.a[0]} / 92%), transparent 45%), radial-gradient(ellipse 72% 120% at 24% 54%, rgb(${c.a[1]} / 78%), transparent 66%)`,
          r: (c) => `radial-gradient(ellipse 58% 105% at 78% 34%, rgb(${c.r[0]} / 72%), rgb(${c.r[1]} / 28%) 48%, transparent 76%)`,
          g: (c) => `linear-gradient(104deg, transparent 24%, rgb(${c.g[0]} / 30%) 40%, rgb(${c.g[1]} / 72%) 51%, rgb(${c.g[0]} / 22%) 62%, transparent 78%)`,
        };
        const BLUR = { a: "2.8vmin", r: "4vmin", g: "2vmin" };
        // two waves, each three drifting layers; x/y in percent of the layer, start and end of the drift
        const WAVES = [
          { t0: 1.0, t1: 3.0, layers: [
            { k: "a", x: [-24, 14], y: [0, 4], s: [0.92, 1.1], r: [-4, 2], peak: 0.9 },
            { k: "r", x: [22, -14], y: [-8, 8], s: [1.08, 0.94], r: [0, 0], peak: 0.7 },
            { k: "g", x: [-30, 20], y: [0, 0], s: [1, 1], r: [-6, 4], peak: 0.55 } ] },
          { t0: 3.1, t1: 4.9, layers: [
            { k: "r", x: [-20, 18], y: [10, -6], s: [0.95, 1.12], r: [3, -3], peak: 0.85 },
            { k: "a", x: [26, -16], y: [-6, 6], s: [1.1, 0.92], r: [2, -4], peak: 0.7 },
            { k: "g", x: [24, -26], y: [0, 0], s: [1, 1], r: [5, -5], peak: 0.6 } ] },
        ];
        const host = document.getElementById("leaks");
        const tl = gsap.timeline({ paused: true });
        tl.set("#tagO", { display: "inline" }, 0);
        tl.set("#tagO", { display: "none" }, 1.0);
        tl.set("#tagL", { display: "inline" }, 1.0);
        tl.fromTo("#title", { opacity: 0 }, { opacity: 1, duration: 0.35, ease: "power2.out" }, 0.3);
        
                WAVES.forEach((w, wi) => {
          const d = w.t1 - w.t0;
          w.layers.forEach((L, li) => {
            const el = document.createElement("div"); el.className = "lk"; el.id = `lk${wi}${li}`;
            el.style.background = GRAD[L.k](P); el.style.filter = `blur(${BLUR[L.k]})`;
            host.appendChild(el);
            tl.fromTo(el, { xPercent: L.x[0], yPercent: L.y[0], scale: L.s[0], rotation: L.r[0] }, { xPercent: L.x[1], yPercent: L.y[1], scale: L.s[1], rotation: L.r[1], duration: d, ease: "sine.inOut" }, w.t0);
            tl.fromTo(el, { opacity: 0 }, { opacity: L.peak * K, duration: d * 0.5, ease: "sine.inOut" }, w.t0);
            tl.to(el, { opacity: 0, duration: d * 0.5, ease: "sine.inOut" }, w.t0 + d * 0.5);
          });
        });
        window.__timelines["main"] = tl;
      })();
    </script>
  </body>
</html>

With Remotion

We have not built this effect in Remotion. If you use it, read its licence first: Individuals (personal or commercial use), organisations or teams with a total headcount of 3 or less, non-profits, and anyone evaluating Remotion before commercial use. A company does not qualify merely because it is unprofitable. Everyone not eligible for the Free License needs a Company License. Remotion licence FAQ, checked Nov 4, 2026.

Source page screenshot, captured 2026-11-07

Remotion light leaks (@remotion/effects lightLeak)

By Remotion

Remotion light leak overlay from the official effects package. The catch is that the live player was not visible and no video file is shown.

Use it for: Adds a warm light leak over a cut.

Licence, price and checks
  • Licence Remotion free licence: individuals and teams up to 3 people free, company licence beyond (remotion.dev/docs/license/faq); template terms not
  • Reuse Remotion licence (free up to 3 employees)
  • Price free
  • Library check likely works, Oct 14, 2026

Source reviewed on Oct 14, 2026. Not tested by us.

In your editor: Premiere, Resolve, After Effects, CapCut

Source page screenshot, captured 2026-11-07

Videezy free overlay footage (light leaks, film overlays)

By Videezy

Free stock site with light leak and film overlay clips. The catch is that licence terms vary clip by clip and this link is a search page.

Use it for: Finds overlay footage for light leaks.

Licence, price and checks
  • Licence Standard, Pro, Creative Commons and Editorial licence types per filter
  • Reuse confirm terms
  • Price free with Pro upsell
  • Library check likely works, Oct 14, 2026

Source reviewed on Oct 14, 2026. Not tested by us.

Source page screenshot, captured 2026-11-07

GL Transitions shader: FilmBurn

By gl-transitions on GitHub

MIT licensed film burn transition shader with a live preview. The catch is that it needs a GL capable host to run.

Use it for: Adds a film burn look between two clips.

Licence, price and checks
  • Licence MIT (per file header)
  • Reuse keep the licence notice
  • Price not shown
  • Library check likely works, Oct 14, 2026

Source reviewed on Oct 14, 2026. Not tested by us.

Variations

The same composition rendered again with different settings. Nothing was rebuilt.

Subtle: warm, gentle bloom{"intensity":"subtle"}
Cool tint, strong, no title (overlay look){"tint":"cool","intensity":"strong","title":false}
Overlay only, no title card{"title":false}

Spec and test details

Engine
HyperFrames 0.8.10, GSAP 3.14.2 (local copy)
Length and frame rate
5 seconds at 24 fps, rendered at 1920x1080
Video files on this page
H.264: 1920x1080 for Expand (4992.3 KB), 1280x720 in the page (1497.9 KB), 640x360 in galleries (328.6 KB), no audio
Picture check
The 1080p file scores VMAF 99.85 against our render master and keeps 103% of its edge detail (measured by us with FFmpeg libvmaf and OpenCV)
Footage
young Thom with a robot arm raised to his face, canal behind, soft daylight (Tears of Steel, 6:33)
Tested in editors
None yet
Flash check
Passed: at most 0 general and 0 red flashes in any second. automated approximation of WCAG 2.3.1 on a 96x54 grid, whole loop including the restart; not a certification.
Licence
Composition adapted by us from the HyperFrames registry (Apache-2.0); text fonts from Google Fonts under the SIL Open Font License.
Last tested
Nov 7, 2026
Machine
Laptop: AMD Ryzen 7 7735U (8 cores, 16 threads), 31 GB RAM, Windows 11 Home; CPU rendering
Technical details: render times and file sizes
  • Render of the 5-second master: 61.2 s (2 render workers, on the laptop above).
  • full.mp4: 4992.3 KB
  • hero.mp4: 1497.9 KB
  • hero.webp: 38.2 KB
  • tile.mp4: 328.6 KB
  • tile.webp: 14.4 KB
  • real-edit.mp4: 2419 KB
  • real-edit-full.mp4: 5249.2 KB
  • real-edit.webp: 73.8 KB
  • Variation "subtle": rendered in 80.4 s, 298.9 KB
  • Variation "cool": rendered in 63 s, 304.7 KB
  • Variation "overlay": rendered in 58.9 s, 307.4 KB

Credits

  • Built from the HyperFrames registry block organic-light-leak-overlay by HeyGen (Apache-2.0), adapted by us.
  • Fonts from Google Fonts, under the SIL Open Font License.
  • Footage: Tears of Steel, (c) Blender Foundation, mango.blender.org, licensed CC-BY 3.0. We cropped the shots to 16:9 and laid our graphics over them.
  • Editor templates and other routes on this page belong to their creators, who are credited on each card.

Related effects and jobs

Page checked on Nov 4, 2026.