AI Video Editing Flows

Effect #012 in our rendered series

Split-flap text

A departure-board title where each letter flips through the alphabet to land on the word.

Real footage

1920x1080 file, 5.0 MB

Rendered by us at 1920x1080 over a shot from Tears of Steel (Blender Foundation, CC-BY 3.0). Expand plays the full 1080p file.

Edit in Premiere, Resolve or After Effects? Jump to editor templates. Making many versions of the same video? Use the code route.

Make this effect with

Built and tested by us

Other ways, not tested by us

Use it in a real edit

Second shot

1920x1080 file, 4.2 MB

The same title effect on another establishing shot from the film Nothing in the composition changed except the footage file.

The composition plays your clip as a muted <video> layer under the graphics (the file plate.mp4 in the code below), so you swap the footage by replacing that file and rendering again. To use the graphics in an editor instead, switch the background off and render a transparent MOV (an H.264 MP4 cannot carry transparency):

Render the graphics alone, with transparency
npx hyperframes render . -o overlay.mov --format mov --fps 24 --variables '{"plate":false}'

The routes in full

With Claude Code: the prompt we used

Rendered and tested by us in HyperFrames 0.8.10 on Nov 7, 2026.

Build a 5-second, 1920x1080, 24 fps HyperFrames composition of split-flap text from the registry block split-flap-board. A departure-board style row of cells flips through intervening characters, staggered left to right with a mechanical rhythm, landing on "EFFECTS" at 0.4 s, then "TRANSITIONS" at 1.9 s, then "CAPTIONS" at 3.4 s, readable at every rest. Variables: accent colour, word set (short words, or long words that need more cells), flip speed, background switch.

What changed since this prompt: the demo on this page is our second version, 5 seconds long, rebuilt on a shot from Tears of Steel with the same animation idea. The full composition below is the one we rendered; its build log lists every change.

Built by a Claude Code subagent (Sonnet) from the HyperFrames registry block split-flap-board, HyperFrames 0.8.10. Claude Code then checked the composition with hyperframes lint and hyperframes check before we rendered it.

What we had to correct (9 notes from the build log):

  • 4 Nov 2026, lint 1: 0 errors, 0 warnings. No fixes needed.
  • Not run (by rule): check, render, snapshot, preview.
  • Source: registry block split-flap-board. Kept the 40 position drum, the two-leaf flap with angle 180 x p squared, and the pure-function-of-time paint driven by a driver setter.
  • Changed: three words in sequence instead of one; the original walks the whole drum from blank (up to 39 flaps), which cannot finish inside a 1.5 s beat, so each cell now walks at most K flaps (K from flip speed and cell count, about 12 at defaults) forward along the drum and lands exactly on its target.
  • Timing choice: the cascade for each word STARTS at its beat (0.4, 1.9, 3.4 s) and finishes within about one second, then rests readable until the next beat. The brief's "landing at" is ambiguous; if the lead wants the word complete at the beat, shift BEATS earlier by about 0.6 s.
  • Board size follows the longest word in the set (7 to 14 cells). Accent bar under the board fills during each cascade. Board fades in at the start and out at 4.7 s for a cleaner loop.
  • Decided against: random intervening characters (the drum order is deterministic and reads like a real board).
  • 5 Nov 05:20 IST (lead): frames showed words still flipping most of the time; beats moved to 0.15, 1.6 and 3.05 s and the default flap shortened to 0.04 s so each word holds readable for about 0.6 to 0.8 s. Lint 0 errors.
  • v2 (7 Nov 2026): plates tx_c1, real-edit second shot; copy is believable film/site copy, no dummy text. QA: first render board covered the figure's face and poster was mid-flap showing 'TRANSITIONR'; board moved to lower area, poster 4.3 s shows CAPTIONS settled, faces clear.

With HyperFrames code

Rendered and tested by us in HyperFrames 0.8.10 on Nov 7, 2026.

Install the block and render
npx hyperframes add split-flap-board
npx hyperframes render . -o out.mp4 --fps 24

Settings you can change without rebuilding (pass them with --variables):

SettingNameTypeDefault
Accent colouraccentcolor#ff5a1f
Word setwordsenumstandard
Seconds per flapflipnumber0.04
Show backgroundplatebooleantrue
Our full composition (index.html, 10 KB)
index.html
<!doctype html>
<html lang="en" data-composition-variables='[
  {"id":"accent","type":"color","label":"Accent colour","default":"#ff5a1f"},
  {"id":"words","type":"enum","label":"Word set","default":"standard","options":[{"value":"short","label":"Short words (fewer cells)"},{"value":"standard","label":"Effects, Transitions, Captions"},{"value":"long","label":"Long words (more cells)"}]},
  {"id":"flip","type":"number","label":"Seconds per flap","default":0.04,"min":0.03,"max":0.12,"step":0.005},
  {"id":"plate","type":"boolean","label":"Show background","default":true}
]'>
  <head>
    <meta charset="UTF-8" />
    <meta name="viewport" content="width=1920, height=1080" />
    <link href="https://fonts.googleapis.com/css2?family=JetBrains+Mono:wght@800&display=block" rel="stylesheet" />
    <script src="gsap.min.js"></script>
    <style>
      *, *::before, *::after { box-sizing: border-box; margin: 0; padding: 0; }
      html, body { width: 1920px; height: 1080px; overflow: hidden; background: transparent; }
      #root { position: relative; width: 100%; height: 100%; overflow: hidden; background: transparent; }
      #plate { position: absolute; inset: 0; background: radial-gradient(120% 90% at 30% 40%, #1b2335 0%, #0b0d12 70%); overflow: hidden; }
      #world { position: absolute; left: -200px; top: -120px; width: 2400px; height: 1320px; }
      .blob { position: absolute; border-radius: 50%; filter: blur(60px); }
      .b1 { width: 760px; height: 760px; left: 180px; top: 260px; background: var(--accent); opacity: 0.35; }
      .b2 { width: 900px; height: 900px; left: 1200px; top: 80px; background: #2f6bff; opacity: 0.45; }
      .grid { position: absolute; inset: 0; background-image: linear-gradient(rgba(255,255,255,0.05) 1px, transparent 1px), linear-gradient(90deg, rgba(255,255,255,0.05) 1px, transparent 1px); background-size: 120px 120px; }
      #stage { position: absolute; inset: 0; z-index: 10; opacity: 0; }
      #board { position: absolute; inset: 0; display: flex; align-items: flex-end; padding-bottom: 130px; box-sizing: border-box; justify-content: center; }
      .sf-cell { position: relative; flex: 0 0 auto; perspective: 900px; border-radius: 9px; background: #0c0c0e; box-shadow: 0 18px 34px rgba(0,0,0,0.55), 0 0 0 1px rgba(255,255,255,0.06); }
      .sf-face { position: absolute; left: 0; width: 100%; height: 50%; overflow: hidden; background: linear-gradient(180deg, #26272c 0%, #1a1b1f 100%); }
      .sf-top, .sf-leaf-a { top: 0; border-radius: 9px 9px 0 0; }
      .sf-bot, .sf-leaf-b { top: 50%; border-radius: 0 0 9px 9px; background: linear-gradient(180deg, #191a1e 0%, #232429 100%); }
      .sf-leaf-a { transform-origin: 50% 100%; z-index: 3; backface-visibility: hidden; }
      .sf-leaf-b { transform-origin: 50% 0%; z-index: 3; backface-visibility: hidden; }
      .sf-glyph { position: absolute; left: 0; width: 100%; display: block; text-align: center; font-family: "JetBrains Mono", monospace; font-weight: 800; color: #f4efe2; white-space: pre; }
      .sf-seam { position: absolute; left: 0; top: 50%; width: 100%; height: 3px; margin-top: -1.5px; background: #050506; z-index: 4; }
      #bar { position: absolute; height: 10px; border-radius: 5px; background: var(--accent); transform-origin: 0% 50%; }
    
      /* footage plate (v2): real footage, pinned, no generated blobs */
      #plate { background: #000 !important; }
      #world { left: 0 !important; top: 0 !important; width: 1920px !important; height: 1080px !important; transform: none !important; }
      #world .blob, #world .grid { display: none !important; }
      #pv { position: absolute; left: 0; top: 0; width: 1920px; height: 1080px; object-fit: cover; }
      #scrim { position: absolute; inset: 0; background: rgba(0,0,0,0.45); }
    </style>
  </head>
  <body>
    <div id="root" data-composition-id="main" data-start="0" data-duration="5" data-fps="24" data-width="1920" data-height="1080">
      <div id="plate"><div id="world"><video id="pv" src="plate.mp4" muted playsinline data-start="0" data-duration="5"></video><div id="scrim"></div><div class="blob b1" id="b1"></div><div class="blob b2" id="b2"></div><div class="grid"></div></div></div>
      <div id="stage"><div id="board"></div><div id="bar"></div></div>
    </div>
    <script>
      window.__timelines = window.__timelines || {};
      (function () {
        const v = window.__hyperframes.getVariables();
        document.getElementById("root").style.setProperty("--accent", v.accent || "#ff5a1f");
        if (!v.plate) document.getElementById("plate").style.display = "none";
        const SETS = {
          short: ["CUT", "FADE", "ZOOM"],
          standard: ["EFFECTS", "TRANSITIONS", "CAPTIONS"],
          long: ["ANIMATIONS", "COMPOSITIONS", "TRANSCRIPTIONS"],
        };
        const WORDS = SETS[v.words] || SETS.standard;
        const BEATS = [0.15, 1.6, 3.05];
        const ALPHA = " ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.,'";
        const N = ALPHA.length, DEG = Math.PI / 180;
        const FLIP = Math.min(0.12, Math.max(0.03, Number(v.flip) || 0.04));
        const STAG = 0.03;
        const n = Math.max.apply(null, WORDS.map((w) => w.length));
        // every cell must land within about one second of its beat so each word rests readable
        const K = Math.max(2, Math.min(16, Math.floor((1.0 - STAG * (n - 1)) / FLIP)));
        const GAP = 10;
        const cw = Math.min(170, Math.floor((1690 - (n - 1) * GAP) / n));
        const chh = Math.round(cw * 1.45);
        const board = document.getElementById("board");
        board.style.gap = GAP + "px";
        const bar = document.getElementById("bar");
        const boardW = n * cw + (n - 1) * GAP;
        bar.style.width = boardW + "px"; bar.style.left = Math.round((1920 - boardW) / 2) + "px"; bar.style.top = Math.round(540 + chh / 2 + 56) + "px";

        function makeFace(cls, top) {
          const f = document.createElement("div"); f.className = "sf-face " + cls;
          const g = document.createElement("span"); g.className = "sf-glyph";
          g.style.height = chh + "px"; g.style.lineHeight = chh + "px"; g.style.fontSize = Math.round(cw * 0.78) + "px"; g.style.top = top + "px";
          f.appendChild(g); return f;
        }
        const cells = [];
        for (let c = 0; c < n; c++) {
          const cell = document.createElement("div"); cell.className = "sf-cell"; cell.id = "sf" + c;
          cell.style.width = cw + "px"; cell.style.height = chh + "px";
          cell.setAttribute("data-layout-allow-overlap", ""); cell.setAttribute("data-layout-allow-occlusion", ""); cell.setAttribute("data-layout-allow-overflow", "");
          const top = makeFace("sf-top", 0), bot = makeFace("sf-bot", -Math.round(chh / 2));
          const la = makeFace("sf-leaf-a", 0), lb = makeFace("sf-leaf-b", -Math.round(chh / 2));
          const seam = document.createElement("div"); seam.className = "sf-seam";
          [top, bot, la, lb, seam].forEach((e) => cell.appendChild(e));
          board.appendChild(cell);
          cells.push({ top: top.firstChild, bot: bot.firstChild, la, lb, ga: la.firstChild, gb: lb.firstChild, flaps: [] });
        }
        // schedule: each cell walks the drum forward to its target, at most K flaps, staggered left to right
        const prev = new Array(n).fill(0);
        WORDS.forEach((word, wi) => {
          const lead = Math.floor((n - word.length) / 2);
          for (let c = 0; c < n; c++) {
            const ch = c >= lead && c < lead + word.length ? word.charAt(c - lead) : " ";
            const target = Math.max(0, ALPHA.indexOf(ch));
            const dist = (target - prev[c] + N) % N;
            if (dist > 0) {
              const k = Math.min(dist, K);
              for (let j = 0; j < k; j++) {
                const from = j === 0 ? prev[c] : (target - k + j + N) % N;
                const to = (target - k + 1 + j + N) % N;
                cells[c].flaps.push({ s: BEATS[wi] + c * STAG + j * FLIP, from, to });
              }
            }
            prev[c] = target;
          }
        });
        function clearLeaf(l, g) { l.style.opacity = "0"; l.style.transform = ""; l.style.filter = ""; g.textContent = ""; }
        function showLeaf(l, g, ch, ang, shade) { g.textContent = ch; l.style.opacity = "1"; l.style.transform = "rotateX(" + ang.toFixed(2) + "deg)"; l.style.filter = "brightness(" + shade + ")"; }
        function paint(t) {
          for (let i = 0; i < n; i++) {
            const cell = cells[i];
            let settled = 0, active = null;
            for (const f of cell.flaps) {
              if (t >= f.s + FLIP) settled = f.to;
              else { if (t >= f.s) active = f; break; }
            }
            if (!active) {
              const ch = ALPHA.charAt(settled);
              cell.top.textContent = ch; cell.bot.textContent = ch;
              clearLeaf(cell.la, cell.ga); clearLeaf(cell.lb, cell.gb);
              continue;
            }
            const out = ALPHA.charAt(active.from), inc = ALPHA.charAt(active.to);
            cell.top.textContent = inc; cell.bot.textContent = out;
            const p = (t - active.s) / FLIP, theta = 180 * p * p;
            const shade = (1 - 0.5 * Math.sin(theta * DEG)).toFixed(3);
            if (theta < 90) { showLeaf(cell.la, cell.ga, out, -theta, shade); clearLeaf(cell.lb, cell.gb); }
            else { clearLeaf(cell.la, cell.ga); showLeaf(cell.lb, cell.gb, inc, 180 - theta, shade); }
          }
        }
        const tl = gsap.timeline({ paused: true });
        tl.fromTo("#world", { x: 0, y: 0 }, { x: -160, y: -50, duration: 5, ease: "none" }, 0);
        tl.fromTo("#b1", { x: 0, y: 0 }, { x: 140, y: -80, duration: 5, ease: "sine.inOut" }, 0);
        tl.fromTo("#b2", { x: 0, y: 0 }, { x: -120, y: 100, duration: 5, ease: "sine.inOut" }, 0);
        tl.fromTo("#stage", { opacity: 0 }, { opacity: 1, duration: 0.3, ease: "power2.out" }, 0);
        tl.to("#stage", { opacity: 0, duration: 0.3, ease: "power2.in" }, 4.7);
        BEATS.forEach((T, i) => {
          tl.fromTo(bar, { scaleX: 0 }, { scaleX: 1, duration: 1.0, ease: "power2.out", immediateRender: i === 0 }, T);
        });
        let dt = 0; const driver = {};
        Object.defineProperty(driver, "t", { configurable: true, get: () => dt, set: (x) => { dt = x; paint(x); } });
        tl.to(driver, { t: 5, duration: 5, ease: "none" }, 0);
        paint(0);
        window.__timelines["main"] = tl;
      })();
    </script>
  </body>
</html>

With Remotion

We have not built this effect in Remotion. If you use it, read its licence first: Individuals (personal or commercial use), organisations or teams with a total headcount of 3 or less, non-profits, and anyone evaluating Remotion before commercial use. A company does not qualify merely because it is unprofitable. Everyone not eligible for the Free License needs a Company License. Remotion licence FAQ, checked Nov 4, 2026.

In your editor: Premiere, Resolve, After Effects, CapCut

We have not reviewed an editor template for this effect yet.

Variations

The same composition rendered again with different settings. Nothing was rebuilt.

Subtle: blue accent, slow flaps{"accent":"#2f6bff","flip":0.1}
Bold: hot pink accent, fast flaps{"accent":"#ff2d6f","flip":0.035}
Long words on a 14 cell board{"words":"long"}

Spec and test details

Engine
HyperFrames 0.8.10, GSAP 3.14.2 (local copy)
Length and frame rate
5 seconds at 24 fps, rendered at 1920x1080
Video files on this page
H.264: 1920x1080 for Expand (5081.8 KB), 1280x720 in the page (1865.1 KB), 640x360 in galleries (417.7 KB), no audio
Picture check
The 1080p file scores VMAF 99.68 against our render master and keeps 99% of its edge detail (measured by us with FFmpeg libvmaf and OpenCV)
Footage
Old Thom among robot machinery in an overgrown hall, wide (Tears of Steel, 9:35)
Tested in editors
None yet
Flash check
Passed: at most 0 general and 0 red flashes in any second. automated approximation of WCAG 2.3.1 on a 96x54 grid, whole loop including the restart; not a certification.
Licence
Composition adapted by us from the HyperFrames registry (Apache-2.0); text fonts from Google Fonts under the SIL Open Font License.
Last tested
Nov 7, 2026
Machine
Laptop: AMD Ryzen 7 7735U (8 cores, 16 threads), 31 GB RAM, Windows 11 Home; CPU rendering
Technical details: render times and file sizes
  • Render of the 5-second master: 62.3 s (2 render workers, on the laptop above).
  • full.mp4: 5081.8 KB
  • hero.mp4: 1865.1 KB
  • hero.webp: 60.6 KB
  • tile.mp4: 417.7 KB
  • tile.webp: 19.8 KB
  • real-edit.mp4: 1634.3 KB
  • real-edit-full.mp4: 4306.5 KB
  • real-edit.webp: 72.3 KB
  • Variation "subtle": rendered in 34.9 s, 419.5 KB
  • Variation "bold": rendered in 74.7 s, 418.1 KB
  • Variation "long": rendered in 63.8 s, 430.7 KB

Credits

  • Built from the HyperFrames registry block split-flap-board by HeyGen (Apache-2.0), adapted by us.
  • Fonts from Google Fonts, under the SIL Open Font License.
  • Footage: Tears of Steel, (c) Blender Foundation, mango.blender.org, licensed CC-BY 3.0. We cropped the shots to 16:9 and laid our graphics over them.
  • Editor templates and other routes on this page belong to their creators, who are credited on each card.

Related effects and jobs

Page checked on Nov 4, 2026.