AI Video Editing Flows

Effect #030 in our rendered series

Torn paper transition

The first scene tears away like paper to reveal the next, for vlogs and social edits.

Real footage

1920x1080 file, 4.9 MB

Rendered by us at 1920x1080 over shots from Tears of Steel (Blender Foundation, CC-BY 3.0). Expand plays the full 1080p file.

Edit in Premiere, Resolve or After Effects? Jump to editor templates. Making many versions of the same video? Use the code route.

Make this effect with

Built and tested by us

Other ways, not tested by us

Use it in a real edit

Second shot

1920x1080 file, 5.4 MB

The same torn paper reveal from the street to the neon lab. Nothing in the composition changed except the footage file.

The composition plays your clip as a muted <video> layer under the graphics (the file plate.mp4 in the code below), so you swap the footage by replacing that file and rendering again. To use the graphics in an editor instead, switch the background off and render a transparent MOV (an H.264 MP4 cannot carry transparency):

Render the graphics alone, with transparency
npx hyperframes render . -o overlay.mov --format mov --fps 24 --variables '{"plate":false}'

The routes in full

With Claude Code: the prompt we used

Rendered and tested by us in HyperFrames 0.8.10 on Nov 7, 2026.

Make a 5 second transition demo where the first scene tears away like paper to reveal the second scene underneath, for vlogs and social edits, with no flash frames.

What changed since this prompt: the demo on this page is our second version, 5 seconds long, rebuilt on 2 shots from Tears of Steel with the same animation idea. The full composition below is the one we rendered; its build log lists every change.

Built by a Claude Code subagent (Sonnet) from the HyperFrames registry block torn-paper-rip, HyperFrames 0.8.10. Claude Code then checked the composition with hyperframes lint and hyperframes check before we rendered it.

What we had to correct (1 note from the build log):

  • v2 (7 Nov 2026): real footage from Tears of Steel, plates tr_engines, tr_oldman. Tear shortened from 1.9 s to 0.8 s at 2.0 s.

With HyperFrames code

Rendered and tested by us in HyperFrames 0.8.10 on Nov 7, 2026.

Install the block and render
npx hyperframes add torn-paper-rip
npx hyperframes render . -o out.mp4 --fps 24

Settings you can change without rebuilding (pass them with --variables):

SettingNameTypeDefault
Paper edge colourtonecolor#f1e6cf
Roughness of the tearroughnessnumber55
Tear directiondirectionenumltr
Show scene backgroundsplatebooleantrue
Our full composition (index.html, 7 KB)
index.html
<!doctype html>
<html lang="en" data-composition-variables='[
  {"id":"tone","type":"color","label":"Paper edge colour","default":"#f1e6cf"},
  {"id":"roughness","type":"number","label":"Roughness of the tear","default":55,"min":20,"max":90},
  {"id":"direction","type":"enum","label":"Tear direction","default":"ltr","options":[{"value":"ltr","label":"Left to right"},{"value":"rtl","label":"Right to left"}]},
  {"id":"plate","type":"boolean","label":"Show scene backgrounds","default":true}
]'>
  <head>
    <meta charset="UTF-8" />
    <meta name="viewport" content="width=1920, height=1080" />
    <link href="https://fonts.googleapis.com/css2?family=Montserrat:wght@800&display=block" rel="stylesheet" />
    <script src="gsap.min.js"></script>
    <style>
      *, *::before, *::after { box-sizing: border-box; margin: 0; padding: 0; }
      html, body { width: 1920px; height: 1080px; overflow: hidden; background: transparent; }
      #root { position: relative; width: 100%; height: 100%; overflow: hidden; background: transparent; font-family: "Montserrat", sans-serif; }
      .scene { position: absolute; inset: 0; }
.vid { position: absolute; left:0; top:0; width:1920px; height:1080px; object-fit: cover; }
      .scene { position: absolute; inset: 0; }
            #shwrap { position: absolute; inset: 0; filter: blur(16px); }
      #sh { position: absolute; inset: 0; background: rgba(0,0,0,0.5); }
      #rimwrap { position: absolute; inset: 0; filter: blur(1.2px); }
      #rim { position: absolute; inset: 0; background: linear-gradient(90deg, var(--tone), color-mix(in srgb, var(--tone) 70%, #7a6a4a)); }
      #lift { position: absolute; inset: 0; filter: drop-shadow(0 0 22px rgba(0,0,0,0.55)); will-change: transform; }
      #ascene { position: absolute; inset: 0; }
      .frag { position: absolute; left: 0; top: 0; background: var(--tone); opacity: 0; box-shadow: 0 4px 10px rgba(0,0,0,0.35); }
    </style>
  </head>
  <body>
    <div id="root" data-composition-id="main" data-start="0" data-duration="5" data-fps="24" data-width="1920" data-height="1080">
      <div class="scene" id="bscene"><video class="plate vid" src="plate_b.mp4" muted playsinline data-start="2.0" data-duration="3.0"></video></div>
      <div id="shwrap"><div id="sh"></div></div>
      <div id="rimwrap"><div id="rim"></div></div>
      <div id="lift">
        <div id="ascene">
          <video class="plate vid" src="plate_a.mp4" muted playsinline data-start="0" data-duration="3.0"></video>
        </div>
      </div>
      <div id="frags"></div>
    </div>
    <script>
      window.__timelines = window.__timelines || {};
      (function () {
        const v = window.__hyperframes.getVariables();
        const root = document.getElementById("root");
        root.style.setProperty("--tone", v.tone);
        if (!v.plate) document.querySelectorAll(".plate").forEach((e) => (e.style.display = "none"));
        function mulberry32(a) { return function () { a |= 0; a = (a + 0x6d2b79f5) | 0; let t = Math.imul(a ^ (a >>> 15), 1 | a); t = (t + Math.imul(t ^ (t >>> 7), 61 | t)) ^ t; return ((t ^ (t >>> 14)) >>> 0) / 4294967296; }; }
        const rnd = mulberry32(777);
        const W = 1920, H = 1080, N = 48;
        const amp = v.roughness / 55;
        const rtl = v.direction === "rtl";
        const ph1 = rnd() * 6.28, ph2 = rnd() * 6.28;
        const wand = [], jit = [], rimw = [];
        for (let k = 0; k <= N; k++) {
          wand.push(0.6 * Math.sin(k * 0.37 + ph1) + 0.4 * Math.sin(k * 0.91 + ph2));
          jit.push(rnd() * 2 - 1);
          rimw.push(6 + rnd() * 8);
        }
        const tilt = 40;
        function frontAt(p, k) {
          const base = -0.10 * W + 1.24 * W * p;
          return base + amp * (wand[k] * 34 + jit[k] * 14) + tilt * (k / N - 0.5);
        }
        function mx(x) { return rtl ? W - x : x; }
        const clipA = document.getElementById("ascene");
        const lift = document.getElementById("lift");
        const rim = document.getElementById("rim");
        const sh = document.getElementById("sh");
        function paint(p) {
          const a = [], b = [], c = [], d = [];
          for (let k = 0; k <= N; k++) {
            const y = (k / N) * H, f = frontAt(p, k);
            a.push(mx(f).toFixed(1) + "px " + y.toFixed(1) + "px");
            b.push(mx(f - rimw[k]).toFixed(1) + "px " + y.toFixed(1) + "px");
            d.push(mx(f - rimw[k] - 46).toFixed(1) + "px " + y.toFixed(1) + "px");
          }
          const far = rtl ? -700 : W + 700;
          const clipPoly = "polygon(" + a.join(",") + "," + far + "px " + H + "px," + far + "px 0px)";
          const back = [];
          for (let k = N; k >= 0; k--) back.push(mx(frontAt(p, k)).toFixed(1) + "px " + ((k / N) * H).toFixed(1) + "px");
          const rimPoly = "polygon(" + b.join(",") + "," + back.join(",") + ")";
          const shBack = [];
          for (let k = N; k >= 0; k--) shBack.push(mx(frontAt(p, k) - rimw[k]).toFixed(1) + "px " + ((k / N) * H).toFixed(1) + "px");
          const shPoly = "polygon(" + d.join(",") + "," + shBack.join(",") + ")";
          clipA.style.clipPath = clipPoly;
          rim.style.clipPath = rimPoly;
          sh.style.clipPath = shPoly;
        }
        const T0 = 2.0, TD = 0.8;
        const ease = gsap.parseEase("power2.inOut");
        const o = { p: 0 };
        const tl = gsap.timeline({ paused: true });
        tl.fromTo(o, { p: 0 }, { p: 1, duration: TD, ease: "power2.inOut", onUpdate: function () { paint(o.p); } }, T0);
        paint(0);
        tl.fromTo("#lift", { rotation: 0 }, { rotation: rtl ? 1.4 : -1.4, duration: TD, ease: "power2.in", transformOrigin: rtl ? "5% 50%" : "95% 50%" }, T0);
        // paper fragments leave the tear
        const frags = document.getElementById("frags");
        for (let i = 0; i < 12; i++) {
          const f = document.createElement("div"); f.className = "frag";
          const w = 12 + rnd() * 20, h = 8 + rnd() * 16;
          f.style.width = w + "px"; f.style.height = h + "px";
          frags.appendChild(f);
          const ts = T0 + 0.25 + (i / 12) * (TD - 0.5);
          const pAt = ease((ts - T0) / TD);
          const yk = Math.min(N, Math.max(0, Math.round(rnd() * N)));
          const sx = mx(frontAt(pAt, yk) - 14), sy = (yk / N) * H;
          tl.fromTo(f, { x: sx, y: sy, opacity: 1, rotation: 0 }, { x: sx - (rtl ? -1 : 1) * (30 + rnd() * 120), y: sy + 80 + rnd() * 160, rotation: (rnd() - 0.5) * 360, opacity: 0, duration: 0.8, ease: "power2.out", immediateRender: false }, ts);
          tl.set(f, { opacity: 0 }, 0);
        }
        // shot B settles after the tear
        tl.to({}, { duration: 5 }, 0);
        window.__timelines["main"] = tl;
      })();
    </script>
  </body>
</html>

With Remotion

We have not built this effect in Remotion. If you use it, read its licence first: Individuals (personal or commercial use), organisations or teams with a total headcount of 3 or less, non-profits, and anyone evaluating Remotion before commercial use. A company does not qualify merely because it is unprofitable. Everyone not eligible for the Free License needs a Company License. Remotion licence FAQ, checked Nov 4, 2026.

In your editor: Premiere, Resolve, After Effects, CapCut

We have not reviewed an editor template for this effect yet.

Variations

The same composition rendered again with different settings. Nothing was rebuilt.

Subtle: clean deckle edge, white paper{"roughness":25,"tone":"#ffffff"}
Bold: rough tear, kraft paper edge{"roughness":88,"tone":"#c99a62"}
Tear travels right to left{"direction":"rtl"}

Spec and test details

Engine
HyperFrames 0.8.10, GSAP 3.14.2 (local copy)
Length and frame rate
5 seconds at 24 fps, rendered at 1920x1080
Video files on this page
H.264: 1920x1080 for Expand (5005.1 KB), 1280x720 in the page (1890.6 KB), 640x360 in galleries (391.6 KB), no audio
Picture check
The 1080p file scores VMAF 97.14 against our render master and keeps 94% of its edge detail (measured by us with FFmpeg libvmaf and OpenCV)
Footage
huge glowing rocket engines firing, warm and pink (Tears of Steel, 0:09); Old Thom close-up, warm, looking down (Tears of Steel, 9:13)
Tested in editors
None yet
Flash check
Passed: at most 1 general and 0 red flashes in any second. automated approximation of WCAG 2.3.1 on a 96x54 grid, whole loop including the restart; not a certification.
Licence
Composition adapted by us from the HyperFrames registry (Apache-2.0); text fonts from Google Fonts under the SIL Open Font License.
Last tested
Nov 7, 2026
Machine
Laptop: AMD Ryzen 7 7735U (8 cores, 16 threads), 31 GB RAM, Windows 11 Home; CPU rendering
Technical details: render times and file sizes
  • Render of the 5-second master: 78.5 s (2 render workers, on the laptop above).
  • full.mp4: 5005.1 KB
  • hero.mp4: 1890.6 KB
  • hero.webp: 51.3 KB
  • tile.mp4: 391.6 KB
  • tile.webp: 17.4 KB
  • real-edit.mp4: 2365 KB
  • real-edit-full.mp4: 5572.5 KB
  • real-edit.webp: 65.6 KB
  • Variation "subtle": rendered in 63.5 s, 390.6 KB
  • Variation "bold": rendered in 66.4 s, 391.3 KB
  • Variation "reverse": rendered in 62.8 s, 387.4 KB

Credits

  • Built from the HyperFrames registry component torn-paper-rip by HeyGen (Apache-2.0), adapted by us.
  • Fonts from Google Fonts, under the SIL Open Font License.
  • Footage: Tears of Steel, (c) Blender Foundation, mango.blender.org, licensed CC-BY 3.0. We cropped the shots to 16:9 and laid our graphics over them.
  • Editor templates and other routes on this page belong to their creators, who are credited on each card.

Related effects and jobs

Page checked on Nov 4, 2026.